DSpace Collection:
https://dspace.kmf.uz.ua/jspui/handle/123456789/930
2024-03-29T09:48:56ZTechnology of laser sparying of films
https://dspace.kmf.uz.ua/jspui/handle/123456789/1507
Title: Technology of laser sparying of films
Authors: Zhiguts Yurij; Katalin Kuchinka; V’yacheslav Aliksiychuk; Zsiguc György; Kucsinka Katalin; Жигуц Юрій; Кучінка Каталін; Аліксійчук В'ячеслав
Abstract: Abstract. Unique properties of laser radiation: coherence, high pulsed power, small angular discrepancy make it possible to focus relatively easily on optical systems, while obtaining extremely high power densities. The first studies of the action of such a laser on the surface gave an unexpected result – the kinetic energy of the emitted components at laser powers up to 106 W was hundreds of electron volts. Most parameters of laser plasma depend nonlinearly on the power density of laser radiation. On the other hand, the idea of heating a substance to thermonuclear temperatures by laser radiation [1] has stimulated a number of plasma studies associated with high-intensity irradiation of condensed matter [1-6].
The aim of the study. Develop a method for obtaining thin films of complex compounds with simultaneous determination of the most important condensation parameters when irradiated with a train of laser pulses.
Description: https://eu-conf.com/wp-content/uploads/2021/10/SCIENCE-ACTUAL-TRENDS-AND-PERSPECTIVES-OF-DEVELOPMENT.pdf2021-01-01T00:00:00ZPerspective Hardening Technologies Are Based on Laser Surface Hardening and Self-propagating High-temperature Synthesis
https://dspace.kmf.uz.ua/jspui/handle/123456789/1393
Title: Perspective Hardening Technologies Are Based on Laser Surface Hardening and Self-propagating High-temperature Synthesis
Authors: Zhiguts Yurij; Kudlotyák Csaba; Pallay Dezső; Zsiguc György; Жигуц Юрій; Кудлотяк Чаба; Поллої Дезидер
Abstract: A cikk a kombináltanyag-feldolgozás hatásának tanulmányozására irányul, amely ötvözi az önterülős magashőmérsékletű
szintézis és a lézeres felületi keményedést. A szerzők elvégezték a szintézisreakciót és kiszámították az adiabatikus hőmérsékletét. Ezenkívül a szerzők egy kombinált kezelés után fedezték fel az acél mikrostruktúráját, amely klasszikus szénacél (bázis) és
különböző típusú karbidokból áll. Egy külön kutatás felfedezte a fázisok tulajdonságait és a felszíni anyag mikrokeménységét,
valamint a szintetizált ötvözettek lehetséges alkalmazását.; Abstract. The article is devoted to the study of the influence of combined surface material processing, which combines self-propagating high-temperature synthesis and laser surface hardening. The authors carried out theoretical calculations of the
adiabatic temperature of the synthesis reaction. In addition, the authors discovered the microstructure of steel after
a combined treatment, which consists of classical carbon steel (base) and carbides of various types. A separate study
revealed the properties of phases and the microhardness of the surface material and the possible applications of synthesized alloys.
Description: https://kmf.uz.ua/wp-content/uploads/2021/02/limes-2018_tom-v_v-evfolyam.pdf; https://opac3.brff.monguz.hu:443/hu/record/-/record/bibBRF000084042018-01-01T00:00:00ZNew Technological Trends of Using SHS
https://dspace.kmf.uz.ua/jspui/handle/123456789/1387
Title: New Technological Trends of Using SHS
Authors: Zhiguts Yurij; Kudlotyák Csaba; Zsiguc György; Жигуц Юрій; Кудлотяк Чобо
Abstract: A szerszámok általában úgy készülnek, hogy a
vágó rész csatlakozik az acél
alapra (forrasztással, hegesztéssel, ragasztással és más
módszerekkel). Új eszközöket
fejlesztettek ki, amelyekben
az önterjesztő magas hőmérsékletű szintézist (ÖMS) nemcsak szintéziséhez, hanem az
eszköz acéltartójához történő
hegesztéshez is használják.
A magas hőképességet úgy
állítják elő, hogy az aluminotermiát (a termit folyamatot) a karbidötvözetek ÖMSjével kombinálják, beleértve a
„karbidosztált” vegyületet. Az
utóbbi egyfajta keményfémötvözet, amelyben a kobaltot
acélszerkezet váltja fel.; Abstract. Tools are usually obtained by joining the
cutting part to a steel harder
(by brazing, welding, gluing and by other methods).
New ways of fabricating
tools have been devised
in which self-propagating
high-temperature synthesis
(SHS) heat is used not only
to the cutting alloy, but also
to simultaneously weld it to
steel holder of the tool. High
heat ability is obtained by
combining aluminothermy
(the thermite process) with
the SHS of carbide alloys,
including “carbonsteel”. The
latter is a form of carbide
alloys in which cobalt is replaced by tool steel.; Резюме. Інструменти, як правило, отримуються шляхом приєднання ріжучої частини до сталевої
основи (пайкою, зварюванням,
склеюванням та іншими способами). Розроблено нові способи
виготовлення інструментів, у яких
тепло саморозповсюджувального
високотемпературного синтезу
(СВС) використовується не тільки
для синтезу різального сплаву, а й
одночасно для його приварювання на сталеву державку інструменту. Висока теплова здатність
отримана шляхом комбінування
алюмотермії (термітного процесу)
з СВС при створенні карбідних
сплавів, у тому числі "карбідосталі". Остання – це вид карбідних
сплавів, у яких кобальт заміщений
інструментальною сталлю.
Description: https://kmf.uz.ua/wp-content/uploads/2021/10/limes-2020-issue-vii_volume-1.pdf; https://opac3.brff.monguz.hu:443/hu/record/-/record/bibBRF000089052020-01-01T00:00:00Z